Calista C3-S Security System Blending
1) A condition where two signals mix together to form one sound or to give the sound of one sound source or one performance.
2) Mixing the left and right signal together slightly which makes the instruments sound closer to the center of the performance stage. 3) A method of panning during mixing where instruments are not panned extremely left or right.
Balanced input/output
A "balanced" connection is one that has three wires to move the signal. One is a ground, and the other two (called conductors) carry signals of equal value. This is why they are called balanced. Low Z cables and connections are the most common example.
Calista C2-88 Projector Floor Toms
The large toms to the right of the drummer.
Active Crossover
Uses active devices (transistors, IC's, tubes) and some form of power supply to operate.
Calista C1-9 Home Theater Kilo
A prefix meaning 1000.
Diaphragm
A thin flexible membrane or cone that vibrates in response to electrical signals to produce sound waves. Distortion is usually referred to in terms of total harmonic distortion (THD) which is the percentage of unwanted harmonics of the drive signal present with the wanted signal. Generally used to mean any unwanted change introduced by the device under question.
Crisp
Describes a good clean high midrange sound. It can be good or bad depending on the look on the face of the guy who said it. Calista Reviews
Dolby
Trade name for a series of noise reduction systems that have become standard on many tape playback machines. Many film soundtracks are produced using this process. Different varieties are found from Dolby B on most personal cassette players, to Dolby SR and Digital, the current state of the art for cinema.
2) Mixing the left and right signal together slightly which makes the instruments sound closer to the center of the performance stage. 3) A method of panning during mixing where instruments are not panned extremely left or right.
Balanced input/output
A "balanced" connection is one that has three wires to move the signal. One is a ground, and the other two (called conductors) carry signals of equal value. This is why they are called balanced. Low Z cables and connections are the most common example.
Calista C2-88 Projector Floor Toms
The large toms to the right of the drummer.
Active Crossover
Uses active devices (transistors, IC's, tubes) and some form of power supply to operate.
Calista C1-9 Home Theater Kilo
A prefix meaning 1000.
Diaphragm
A thin flexible membrane or cone that vibrates in response to electrical signals to produce sound waves. Distortion is usually referred to in terms of total harmonic distortion (THD) which is the percentage of unwanted harmonics of the drive signal present with the wanted signal. Generally used to mean any unwanted change introduced by the device under question.
Crisp
Describes a good clean high midrange sound. It can be good or bad depending on the look on the face of the guy who said it. Calista Reviews
Dolby
Trade name for a series of noise reduction systems that have become standard on many tape playback machines. Many film soundtracks are produced using this process. Different varieties are found from Dolby B on most personal cassette players, to Dolby SR and Digital, the current state of the art for cinema.
Comments
Post a Comment