Calista C3-S Security System High Impedance Cord (High Z)
A big word for instrument cable. These cords generally have quarter inch male ends. they tend to loose signal strength at lengths longer than 25 feet.
Jam Sync
A generation of new SMPTE according to the input SMPTE signal
Calista C1-9 Home Theater Intermodulation Distortion
Distortion caused by one signal beating with another signal and producing frequencies that are both the sum and the difference of the original frequencies.
Attenuator (Pot)
The electronic dohickey under the knobs that increases or reduces the strength of the signal running through it. When these get old and dirty, they can make popping noises or rumbles in your PA (As in "my pots are dirty").
Assign Tochoose to which place an output is going to be sent.
Calista C2-88 Projector Dolby
Trade name for a series of noise reduction systems that have become standard on many tape playback machines. Many film soundtracks are produced using this process. Different varieties are found from Dolby B on most personal cassette players, to Dolby SR and Digital, the current state of the art for cinema.
AES/EBU
Professional Interface A standard for sending and receiving digital audio adopted by the Audio Engineering Society and the European Broadcast Union.
Cut-Off Frequency (Turnover Frequency)
1) The highest or lowest frequency in the pass band of a filter.
2) The highest or lowest frequency passed by an audio device (the cut-off frequency is usually considered to be the first frequency to be 3 dB lower than a reference frequency in the middle of the bandwidth of the device) Bose
Echo Send
The output of a console used to send a signal to an echo chamber or delay effects device.
Jam Sync
A generation of new SMPTE according to the input SMPTE signal
Calista C1-9 Home Theater Intermodulation Distortion
Distortion caused by one signal beating with another signal and producing frequencies that are both the sum and the difference of the original frequencies.
Attenuator (Pot)
The electronic dohickey under the knobs that increases or reduces the strength of the signal running through it. When these get old and dirty, they can make popping noises or rumbles in your PA (As in "my pots are dirty").
Assign Tochoose to which place an output is going to be sent.
Calista C2-88 Projector Dolby
Trade name for a series of noise reduction systems that have become standard on many tape playback machines. Many film soundtracks are produced using this process. Different varieties are found from Dolby B on most personal cassette players, to Dolby SR and Digital, the current state of the art for cinema.
AES/EBU
Professional Interface A standard for sending and receiving digital audio adopted by the Audio Engineering Society and the European Broadcast Union.
Cut-Off Frequency (Turnover Frequency)
1) The highest or lowest frequency in the pass band of a filter.
2) The highest or lowest frequency passed by an audio device (the cut-off frequency is usually considered to be the first frequency to be 3 dB lower than a reference frequency in the middle of the bandwidth of the device) Bose
Echo Send
The output of a console used to send a signal to an echo chamber or delay effects device.
Comments
Post a Comment