Calista C2-88 Projector Echo Send Control

A control to send the signal from the input module to the echo chamber or effects device via the echo buss.

High-Pass Filter
A device that rejects signals that are below a certain frequency (called the cut-off frequency) and passes signals with frequencies that are higher.

Calista C1-9 Home Theater Filter
1) A device that removes signals with frequencies above or below a certain point called the cut-off frequency.
2) An equalizer section, used in this sense because filters are used with other components to give an equalizer its frequency response characteristics.
3) The action of removing signals of some frequencies and leaving the rest.
4) A mechanical device to smooth out speed variations in tape machines called a Scrape Flutter Filter- more usually called a Scrape Flutter Idler

Level
The amount of signal strength; the amplitude, especially the average amplitude.

Calista C3-S Security System Cable, XLR
A balanced cable used for low impedance microphones and sometimes for connections between some parts of the PA. Commonly referred to as a "mic cord".

Chorusing
1) A term meaning the same thing as Chorus (Definition 3 or 4).
2) In some delay effects devices, a term used to mean the term Depth (the amount of change in the controlled signal by the control signal).

Ambient Field
A term with the same meaning as the term Reverberant Field (the area away from the sound source where the reverberation is louder than the direct sound). Bose

Assistant Engineer
A less elevated version of the term Second Engineer. Experienced seconds often place microphones, operate tape machines, break down equipment at the session end and keep the paperwork for the session.

Comments

Popular posts from this blog

Calista C1-9 Home Theater Information Bits

Calista C1-9 Home Theater Bi

Calista C1-9 Home Theater Electric Current